BarYak Expedition SL 2019 with Carbon Cross Bar & Carbon Bar Ends

unnamed-(5).jpg
Screen Shot 2019-05-15 at 5.39.26 PM.png
unnamed-(4).jpg
IMG_0468.jpg
IMG_0475.jpg
57373176_347307082560488_1486283165176692736_n.png
unnamed-(5).jpg
Screen Shot 2019-05-15 at 5.39.26 PM.png
unnamed-(4).jpg
IMG_0468.jpg
IMG_0475.jpg
57373176_347307082560488_1486283165176692736_n.png

BarYak Expedition SL 2019 with Carbon Cross Bar & Carbon Bar Ends

229.50
Quantity:
Add To Cart

BarYak Expedition SL 2019
COMPLETE (without Peregrine 4 arm rest) CARBON X BAR AND CARBON BAR ENDS

Features:
 -Stress-tested to 150lbs.
 -Rails CNC machined from aluminium billet and anodized
 -Carbon fiber bar ends, tube and arm rest
 -Weight of complete system, 450Gr / 15.75oz.
 -Rails are 7 3/4" from end to end, Fits only 31.8 Bar's
 (Mounts) Pass-through attachment for Strap & 10-32 accessory screw mount, Screw & Strap **Not  included**

Mounting: Once Your desired BarYak width is determined, secure the bottom Bracket to the handlebar by inserting the “C" clamp bolts through the Top and into the bottom “C “ bracket, Using the 4mm Allen wrench, evenly tighten these bolts to a torque of 42–63in-lbs. (4.7–7.2N-m). Note: You may have to un-wrap the top section of handlebar tape in order to gain the desired clamping width. Do not route the brake or shift cable housing underneath the aerobar brackets—this will affect braking and/or shifting performance. 

**DO NOT Use Tape Under the BarYak Clamp & only use on TT rated Handle Bars, ( Carbon, Aluminum, & Titanium )