BARYAK EXPEDITION SL With Carbon Bar Ends And Optional Profile Design Flip-Up ArmRests

Complete BarYak Expedition and Profile Design Flip-Up system requires a minimum 1 7/16” of space on either side of the stem

FEATURES

• Carbon crossbar (11” / 28cm)

• Carbon ergonomic bar ends (4oz /112g)

• Custom etching available ($20)

• Compatible with BarYak Talon Harness system

• Optional Profile Design Ergo Armrest and Flip-Up Bracket Kit

• Weight of complete system: 15.72oz / 447g

EXPEDITION RAIL SPECIFICATIONS

• Stress tested to 150 pounds

• CNC machined billet and anodized aluminum rails

• 10-32 thread pitch on all screws

• Fits 35mm and 31.8mm diameter bars

  • 35mm to 31.8mm shim kit available

• Rail Dimensions: 8” L x 0.5” W x 1 5/8” H (20.32cm L x 1.27cm W x 4.13cm)

•  -New 2023 Lighter Weight of single rail 4.65oz - 133gm

Profile Design Flip-Up ArmRest Kit Features & Specifications

• Smoothly curved shape designed to comfortably cup the elbows while providing good support and control

• 10mm thick Ergo Ultra pads provide superior grip and improved surface durability

• Bolt pattern yields 48 possible configurations

• Flip-Up armrest leaves drop bar clear for riding with your hands on the flat section of the handlebar.

• Neosonic bracket kit made from 6061-T6 aluminum

• Fits 31.8mm bars

• Weight: 9.3oz / 263g

• M6 x 10 FHB Screws

HANDLEBAR COMPATIBILITY

IMPORTANT: ALWAYS MOUNT BARYAK DIRECTLY TO HANDLEBARS (do not use tape)

• DROP BARS

  • Must be time trial rated

• FLAT BARS

  • Compatible with all riser bars

Expedition Rail MOUNTING INSTRUCTIONS

1. Determine desired BarYak placement

   • If mounting to drop bars, you may need to unwrap the top section of handlebar tape for desired clamping width.

2. Using supplied screws, secure C-clamp (bottom) around the handlebar to BarYak rails

3. Important: BarYak must be mounted directly to handlebars. DO NOT use tape.

4. Using a 4mm Allen wrench, evenly tighten the bolts

   • Torque Specifications: 5.7Nm (4.2 foot-pounds)

5. Carbon Bar ends - tighten these bolts to a torque 4.7N-m

6. Do not route the brake or shifter cable housing underneath the aerobar brackets—this will affect braking and/or shifting performance

Profile Design ArmRest Pad & Bracket MOUNTING INSTRUCTIONS

Complete BarYak Expedition and Profile Design Flip-Up system requires a minimum of 1 7/16” of space on either side of the stem

1. Mount each Profile Design bracket with 1/8" of space outside of each Expedition Rail

2. Secure the lower bracket (C-clamp) to the handlebar by inserting the bolts through the C-clamp and threading them up into the top flip-up assembly.

3. Using the 5mm Allen wrench, evenly tighten the bolts

   • Torque Specifications: 5.7Nm (4.2 foot-pounds)

4. Note: You may have to unwrap the top section of the handlebar tape for the desired clamping width.

5. Maintenance Tip: We recommend using a drop of chain lube on the hinge of the Profile Design Flip-Up armrest for longevity and noise reduction on rugged terrain.